System Management
Basic System Configuration Guide 513
*A:ALA-48>show>redundancy>multi-chassis# mc-ring global-statistics
==============================================================================
Global MC Ring statistics
==============================================================================
Rx : 0
Rx Too Short : 0
Rx Wrong Authentication : 0
Rx Invalid TLV : 0
Rx Incomplete : 0
Rx Unknown Type : 0
Rx Unknown Peer : 0
Rx Unknown Ring : 0
Rx Unknown Ring Node : 0
Tx : 36763
Tx No Buffer : 0
Tx Transmission Failed : 0
Tx Unknown Destination : 0
Missed Configuration Events : 0
Missed BFD Events : 0
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis#
sync
Syntax sync [port port-id | lag-id]
Context show>redundancy>multi-chassis
Description This command displays synchronization information.
Parameters port port-id — Shows the specified port ID of the multi-chassis peer.
lag lag-id — Shows information for the specified LAG identifier.
Values 1 to 800
Output The following table describes show redundancy multi-chassis sync output fields:
Missed BFD Events Displays the number of missed BFD events on this system.
Table 62: Mc-ring global-statistics Command Field Descriptions (Continued)
Label Description
Table 63: Redundancy Multi-chassis Sync Field Descriptions
Label Description
Peer IP Address Displays the multi-chassis redundancy peer.
Description The text string describing the peer.
To Next Page
Loading...
