System Management
Basic System Configuration Guide 521
script-policy
Syntax script-policy script-policy-name [owner owner-name]
script-policy run-history [run-state]
Context show>system>script-control
Description This command displays script policy information.
Parameters script-policy-name — Displays policy information for the specified script.
owner owner-name — Displays information for the specified script owner.
Default TiMOS CLI
run-state — Displays information for script policies in the specified state.
Values executing | initializing | terminated
Output The following table describes script policy output fields.
Table 67: Script Policy Output
Label Description
Script policy Displays the name of the script policy.
Script policy owner The name of the script policy owner.
Administrative status Enabled — Administrative status is enabled.
Disabled — Administrative status is disabled.
Script The name of the script.
Script owner The name of the script owner.
Script source location Displays the location of scheduled script.
Max running allowed Displays the maximum number of allowed sessions.
Max completed run
histories
Displays the maximum number of sessions previously run.
Max lifetime allowed Displays the maximum amount of time the script may run.
Completed run
histories
Displays the number of completed sessions.
Executing run
histories
Displays the number of sessions in the process of executing.
Initializing run
histories
Displays the number of sessions ready to run/queued but not executed.
To Next Page
Loading...
