Show, Clear, Debug, and Tools Command Reference
500 Basic System Configuration Guide
all
Syntax all [detail]
Context show>redundancy>multi-chassis
Description This command displays brief multi-chassis redundancy information.
Parameters detail — Shows detailed multi-chassis redundancy information.
Output The following table describes Redundancy Multi-Chassis All fields:
Sample Output
B:Dut-B# show redundancy multi-chassis all
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.2
Description : Mc-Lag peer 10.10.10.2
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
===============================================================================
B:Dut-B#
B:Dut-B# show lag detail
===============================================================================
LAG Details
===============================================================================
LAG 1
-------------------------------------------------------------------------------
Description: Description For LAG Number 1
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 1 Mode : access
Table 56: Redundancy multi-chassis all Field Descriptions
Label Description
Peer IP Address Displays the multi-chassis redundancy peer.
Description The text string describing the peer.
Authentication If configured, displays the authentication key used between this node and
the MC peer.
Source IP Address Displays the source address used to communicate with the MC peer.
Admin State Displays the administrative state of the peer.
To Next Page
Loading...
