Alcatel-Lucent 7450 - Page 501

System Management
Basic System Configuration Guide 501
Adm : up Opr : up
Thres. Exceeded Cnt : 9 Port Threshold : 0
Thres. Last Cleared : 05/20/2006 00:12:35 Threshold Action : down
Dynamic Cost : false Encap Type : null
Configured Address : 1c:71:ff:00:01:41 Lag-IfIndex : 1342177281
Hardware Address : 1c:71:ff:00:01:41 Adapt Qos : distribute
Hold-time Down : 0.0 sec
LACP : enabled Mode : active
LACP Transmit Intvl : fast LACP xmit stdby : enabled
Selection Criteria : highest-count Slave-to-partner : disabled
Number of sub-groups: 1 Forced : -
System Id : 1c:71:ff:00:00:00 System Priority : 32768
Admin Key : 32768 Oper Key : 32666
Prtr System Id : 20:f4:ff:00:00:00 Prtr System Priority : 32768
Prtr Oper Key : 32768
MC Peer Address : 10.10.10.2 MC Peer Lag-id : 1
MC System Id : 00:00:00:33:33:33 MC System Priority : 32888
MC Admin Key : 32666 MC Active/Standby : active
MC Lacp ID in use : true MC extended timeout : false
MC Selection Logic : peer decided
MC Config Mismatch : no mismatch
-------------------------------------------------------------------------------
Port-id Adm Act/Stdby Opr Primary Sub-group Forced Prio
-------------------------------------------------------------------------------
331/2/1 up active up yes 1 - 32768
331/2/2 up active up 1 - 32768
331/2/3 up active up 1 - 32768
331/2/4 up active up 1 - 32768
-------------------------------------------------------------------------------
Port-id Role Exp Def Dist Col Syn Aggr Timeout Activity
-------------------------------------------------------------------------------
331/2/1 actor No No Yes Yes Yes Yes Yes Yes
331/2/1 partner No No Yes Yes Yes Yes Yes Yes
331/2/2 actor No No Yes Yes Yes Yes Yes Yes
331/2/2 partner No No Yes Yes Yes Yes Yes Yes
331/2/3 actor No No Yes Yes Yes Yes Yes Yes
331/2/3 partner No No Yes Yes Yes Yes Yes Yes
331/2/4 actor No No Yes Yes Yes Yes Yes Yes
331/2/4 partner No No Yes Yes Yes Yes Yes Yes
===============================================================================
B:Dut-B#
mc-endpoint
Syntax mc-endpoint statistics
mc-endpoint peer [ip-address] statistics
mc-endpoint endpoint [mcep-id] statistics
mc-endpoint peer [ip-address]
Context show>redundancy>multi-chassis
Description This command displays multi-chassis endpoint information.
Parameters statistics — Displays the global statistics for the MC endpoint.