Alcatel-Lucent 7450 - Page 499

System Management
Basic System Configuration Guide 499
Interface-Name Adm Opr(v4/v6) Mode Port/SapId
IP-Address PfxState
---------------------------------------------------------------------------
management Up Up/Up Network B/1 -> A/1
138.120.186.219/24 n/a
3000::8a78:badb/96 PREFERRED
fe80::221:5ff:fece:df49/64 PREFERRED
---------------------------------------------------------------------------
Interfaces : 1
===========================================================================
*B:Dut-A# show router "management" interface detail
===============================================================================
Interface Table (Router: management)
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name : management
Admin State : Up Oper (v4/v6) : Up/Up
Protocols : None
IP Addr/mask : 138.120.186.219/24 Address Type : Primary
IGP Inhibit : Disabled Broadcast Address : Host-ones
HoldUp-Time : 0 Track Srrp Inst : 0
IPv6 Address : 3000::8a78:badb/96
IPv6 Addr State : PREFERRED
CGA modifier : (Not Specified)
HoldUp-Time : 0 Track Srrp Inst : 0
Link Lcl Address : fe80::221:5ff:fece:df49/64
Link Lcl State : PREFERRED
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description : (Not Specified)
If Index : 1280 Virt. If Index : 1280
Last Oper Chg : 06/16/2015 21:01:07 Global If Index : 16384
Lag Link Map Prof: none
Port Id : B/1 -> A/1
TOS Marking : Trusted If Type : Network
Egress Filter : none Ingress Filter : none
Egr IPv6 Flt : none Ingr IPv6 Flt : none
BGP IP FlowSpec : Disabled
BGP IPv6 FlowSpec: Disabled
SNTP B.Cast : True Network QoS Policy: 1
MAC Address : 00:21:05:ce:df:49 Mac Accounting : Disabled
multi-chassis
Syntax multi-chassis
Context show>redundancy
Description This command enables the context to show multi-chassis redundancy information.