Alcatel-Lucent 7450 - Page 469

System Management
Basic System Configuration Guide 469
Script Run #22
-------------------------------------------------------------------------------
Start time : never End time : never
Elapsed time : 0d 00:00:00 Lifetime : 0d 01:00:00
State : initializing Run exit code : noError
Result time : never Keep history : 0d 01:00:00
Error time : never
Results file : none
-------------------------------------------------------------------------------
Script Run #23
-------------------------------------------------------------------------------
Start time : never End time : never
Elapsed time : 0d 00:00:00 Lifetime : 0d 01:00:00
State : initializing Run exit code : noError
Result time : never Keep history : 0d 01:00:00
Error time : never
Results file : none
===============================================================================
*A:Redundancy#
schedule
Syntax schedule [schedule-name] [owner schedule-owner]
Context show>cron
Description This command displays cron schedule parameters.
Parameters schedule-name — Displays information for the specified scheduler name.
owner schedule-owner — Displays information for the specified scheduler owner.
Output The following table describes the show cron schedule output fields.
Table 47: Cron Schedule Field Descriptions
Label Description
Schedule name Displays the schedule name.
Schedule owner Displays the owner name of the action.
Description Displays the schedule’s description.
Administrative status Enabled — The administrative status is enabled.
Disabled — Administratively disabled.
Operational status Enabled — The operational status is enabled.
Disabled — Operationally disabled.
Action Displays the action name
Action owner Displays the name of action owner.