Alcatel-Lucent 7450 - Page 470

Show, Clear, Debug, and Tools Command Reference
470 Basic System Configuration Guide
Sample Output
A:sim1>show>cron schedule test
===============================================================================
CRON Schedule Information
===============================================================================
Schedule : test
Schedule owner : TiMOS CLI
Description : none
Administrative status : enabled
Operational status : enabled
Action : test
Script Displays the name of the script.
Script owner Displays the name of the script.
Script owner Displays the name of the of script owner.
Script source location Displays the location of scheduled script.
Script results location Displays the location where the script results have been sent.
Schedule type Periodic — Displays a schedule which ran at a given interval.
Calendar — Displays a schedule which ran based on a calendar.
Oneshot — Displays a schedule which ran one time only.
Interval Displays the interval between runs of an event.
Next scheduled run Displays the time for the next scheduled run.
Weekday Displays the configured weekday.
Month Displays the configured month.
Day of Month Displays the configured day of month.
Hour Displays the configured hour.
Minute Displays the configured minute.
Number of scheduled
runs
Displays the number of scheduled sessions.
Last scheduled run Displays the last scheduled session.
Number of scheduled
failures
Displays the number of scheduled sessions that failed to execute.
Last scheduled failure Displays the last scheduled session that failed to execute.
Last failure time Displays the system time of the last failure.
Table 47: Cron Schedule Field Descriptions (Continued)
Label Description (Continued)