System Management
Basic System Configuration Guide 471
Action owner : TiMOS CLI
Script : test
Script Owner : TiMOS CLI
Script source location : ftp://*****:******@192.168.15.1/home/testlab_bgp
/cron/test1.cfg
Script results location : ftp://*****:******@192.168.15.1/home/testlab_bgp
/cron/res
Schedule type : periodic
Interval : 0d 00:01:00 (60 seconds)
Next scheduled run : 0d 00:00:42
Weekday : tuesday
Month : none
Day of month : none
Hour : none
Minute : none
Number of schedule runs : 10
Last schedule run : 2008/01/01 17:20:52
Number of schedule failures : 0
Last schedule failure : no error
Last failure time : never
===============================================================================
A:sim1>show>cron
information
Syntax information
Context show>system
Description This command displays general system information including basic system, SNMP server, last boot
and DNS client information.
Output The following table describes the system information output fields.
Table 48: System Information Field Descriptions
Label Description
System Name The configured system name.
System Contact A text string that describes the system contact information.
System Location A text string that describes the system location.
System Coordinates A text string that describes the system coordinates.
System Up Time The time since the last boot.
SNMP Port The port number used by this node to receive SNMP request messages
and to send replies.
SNMP Engine ID The SNMP engineID to uniquely identify the SNMPv3 node.
To Next Page
Loading...
