Show, Clear, Debug, and Tools Command Reference
476 Basic System Configuration Guide
load-balancing-alg
Syntax load-balancing-alg [detail]
Context show>system
Description This command displays system load balancing settings.
Parameters detail — Displays port settings.
Output
Sample Output
*A:ALA-49>show>system# load-balancing-alg
===============================================================================
System-wide Load Balancing Algorithms
===============================================================================
L4 - Load Balance : exclude-L4
LSR - Load Balance : lbl-only
===============================================================================
*A:ALA-49>show>system#
memory-pools
Syntax memory-pools
Context show>system
Description This command displays system memory status.
Output The following table describes memory pool output fields.
Table 49: System Memory-Pools Field Descriptions
Label Description
Name The name of the system or process.
Max Allowed Integer — The maximum allocated memory size.
No Limit — No size limit.
Current Size The current size of the memory pool.
Max So Far The largest amount of memory pool used.
In Use The current amount of the memory pool currently in use.
Current Total Size The sum of the Current Size column.
Total In Use The sum of the In Use column.
To Next Page
Loading...
