System Management
Basic System Configuration Guide 493
Sample Output
A:ALA-1# show system sntp
===============================================================================
SNTP
===============================================================================
SNTP Server Version Preference Interval
-------------------------------------------------------------------------------
10.10.20.253 3 Preferred 64
===============================================================================
A:ALA-1#
thresholds
Syntax thresholds
Context show>system
Description This command displays system monitoring thresholds. The Threshold Events Log table will keep only
the last 201 entries.
Output The following table describes system threshold output fields.
Version The SNTP version number, expressed as an integer.
Preference Normal — When more than one time server is configured, one server can
be configured to have preference over another.
Preferred — Indicates that this server has preference over another.
Interval The frequency, in seconds, that the server is queried.
Table 52: System SNTP Field Descriptions (Continued)
Label Description
Table 53: System Thresholds Field Descriptions
Label Description
Variable Displays the variable OID.
Alarm Id Displays the numerical identifier for the alarm.
Last Value Displays the last threshold value.
Rising Event Id Displays the identifier of the RMON rising event.
Threshold Displays the identifier of the RMON rising threshold.
Falling Event Id Displays the identifier of the RMON falling event.
Threshold Displays the identifier of the RMON falling threshold.
To Next Page
Loading...
