Show, Clear, Debug, and Tools Command Reference
494 Basic System Configuration Guide
Sample Output
A:bkvm3# show system thresholds
=================================================================
Threshold Alarms
=================================================================
Variable: tmnxCpmFlashUsed.1.10.1
Alarm Id : 1 Last Value : 3192120
Rising Event Id : 1 Threshold : 10
Falling Event Id : 0 Threshold : 0
Sample Interval : 1 SampleType : absolute
Startup Alarm : either Owner : TiMOS CLI
Variable: tmnxCpmFlashUsed.1.10.2
Alarm Id : 2 Last Value : 0
Rising Event Id : 2 Threshold : 20
Falling Event Id : 3 Threshold : 30
Sample Interval : 2 SampleType : absolute
Startup Alarm : either Owner : TiMOS CLI
Variable: tmnxCpmFlashPercentageUsed.1.10.1
Alarm Id : 3 Last Value : 19
Rising Event Id : 4 Threshold : 30
Sample Interval Displays the polling interval, in seconds, over which the data is sampled
and compared with the rising and falling thresholds.
SampleType Displays the method of sampling the selected variable and calculating the
value to be compared against the thresholds.
Startup Alarm Displays the alarm that may be sent when this alarm is first created.
Owner Displays the owner of this alarm.
Description Displays the event cause.
Event Id Displays the identifier of the threshold event.
Last Sent Displays the date and time the alarm was sent.
Action Type log — An entry is made in the RMON-MIB log table for each event
occurrence.
trap — A TiMOS logger event is generated. The TiMOS logger utility
then distributes the notification of this event to its configured log
destinations, which may be CONSOLE, telnet session, memory log,
cflash file, syslog, or SNMP trap destinations logs.
both — Both an entry in the RMON-MIB logTable and a TiMOS logger
event are generated.
none — No action is taken
Owner Displays the owner of the event.
Table 53: System Thresholds Field Descriptions (Continued)
Label Description (Continued)
To Next Page
Loading...
