System Management
Basic System Configuration Guide 461
card
Syntax card
Context show>system
Description This command enables the context to display card information.
memory-pools
Syntax memory-pools
Context show>system>card
Description This command displays the memory pools for the card.
connections
Syntax connections [address ip-address] [port port-number] [detail]
Context show>system
Description This command displays UDP and TCP connection information.
If no command line options are specified, a summary of the TCP and UDP connections displays.
Parameters ip-address — Displays only the connection information for the specified IP address.
Values
port-number — Displays only the connection information for the specified port number.
Values 0 to 65535
detail — Appends TCP statistics to the display output.
Output The following table describes the system connections output fields.
ipv4-address: a.b.c.d (host bits must be 0)
ipv6-address: x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0 to FFFF]H
d: [0 to 255]D
interface: 32 characters maximum, mandatory for link local
addresses
To Next Page
Loading...
