Alcatel-Lucent 7450 - Page 184

File Command Reference
184 Basic System Configuration Guide
Use the file-url with the optional wildcard “*” to reduce the number of files to list.
Default Lists all files in the present working directory
sort-order {d | n | s} — Specifies the sort order.
Values d — date
n — name
s — size
reverse — Reverses the sort order.
Output
Sample Output
A:cses-E12>file cf3:\ # dir
- dir [<file-url>] [sort-order { d|n|s}][reverse]
<file-url> : <local-url>|<remote-url>
local-url - [<cflash-id>/][<file-path>]
200 chars max, including cflash-id
directory length 99 chars max each
remote-url - [ftp://<login>:<pswd>@<remote-locn>/
][<file-path>]
255 chars max
directory length 99 chars max each
remote-locn - [ <hostname> | <ipv4-address> |
[<ipv6-address>]]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id - cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|
cf2-B:|cf3:|cf3-A:|cf3-B:
<d|n|s> :Sort order: d - date, n - name, s - size
<reverse> : keyword - reverse order
A:cses-E12>file cf3:\ # dir
file
Syntax file
Context root
Description The context to enter and perform file system operations. When entering the file context, the prompt
changes to reflect the present working directory. Navigating the file system with the cd .. command
results in a changed prompt.
The exit all command leaves the file system/file operation context and returns to the <root> CLI
context. The state of the present working directory is maintained for the CLI session. Entering the file
command returns the cursor to the working directory where the exit command was issued.