File System Management
Basic System Configuration Guide 189
Description Displays the contents of a text file.
Parameters file-url — The file contents to display.
Values
version
Syntax version file-url [check]
Context file
Description This command displays the version of an SR OS *.tim or iom.tim file. The iom.tim file is used for the
XCM on the 7950 XRS.
Parameters file-url — The file name of the target file.
Values
check — Validates the .tim file.
Output
Sample Output
local-url | remote-url
local-url [cflash-id/][file-path]
200 chars max, including cflash-id
directory length 99 chars max each
remote-url [{ftp://|tftp://}login:pswd@remote-locn/ [file-path]
255 chars max
directory length 99 chars max each
remote-locn [hostname | ipv4-address | ipv6-address]
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cflash-id cf1:, cf1-A:, cf1-B:
local-url | remote-url 255 characters maximum
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://}login:pswd@remote-locn/][file-path]
cflash-id cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:|cf3:|cf3-A:|cf3-B:
To Next Page
Loading...
