BOF Configuration Command Reference
224 Basic System Configuration Guide
tertiary-dns
Syntax [no] tertiary-dns ip-address
Context bof
Description This command configures the tertiary DNS server for DNS name resolution. The tertiary DNS server
is used only if the primary DNS server and the secondary DNS server do not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also when
defining file URLs. DNS name resolution is not supported when DNS names are embedded in
configuration files.
The no form of the command removes the tertiary DNS server from the configuration.
Default no tertiary-dns — No tertiary DNS server is configured.
Parameters ip-address — The IP or IPv6 address of the tertiary DNS server.
Ipv6 is applicable to the 7750 SR and 7950 XRS only.
Values
x: [0..FFFF]H
d: [0..255]D
interface 32 chars max, for link local addresses
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0..FFFF]H
d: [0..255]D
interface 32 chars max, for link local addresses
To Next Page
Loading...
