Entering CLI Commands
32 Basic System Configuration Guide
post-lines keyword: display some lines after the matching line
lines-count 1 — 2147483647
For example:
A:Dut-C# show log log-id 98 | match ignore-case "sdp bind"
"Status of SDP Bind 101:1002 in service 1001 (customer 1) changed to admin=up oper=u
p flags="
"Processing of a SDP state change event is finished and the status of all affected S
DP Bindings on SDP 101 has been updated."
A:Dut-C# show log log-id 98 | match max-count 1 "service 1001"
"Status of service 1001 (customer 1) changed to administrative state: up, operationa
l state: up"
A:Dut-C# admin display-config | match post-lines 5 max-
count 2 expression "OSPF.*Config"
echo "OSPFv2 Configuration"
#--------------------------------------------------
ospf
timers
spf-wait 1000 1000 1000
exit
echo "OSPFv2 (Inst: 1) Configuration"
#--------------------------------------------------
ospf 1
asbr
router-id 1.0.0.1
export "testall"
*A:Dut# admin display-config | match debug_mirror
profile "debug_mirror"
*A:Dut# admin display-config | match context parent debug_mirror
#--------------------------------------------------
system
security
profile "debug_mirror"
*A:Dut# admin display-config | match context all debug_mirror
#--------------------------------------------------
system
security
profile "debug_mirror"
default-action deny-all
entry 10
exit
*A:Dut# show log event-control | match ignore-case pre-lines 10 SyncStatus
L 2016 tmnxLogOnlyEventThrottled MA gen 0 0
MCPATH:
2001 tmnxMcPathSrcGrpBlkHole MI gen 0 0
To Next Page
Loading...
