Alcatel-Lucent 7450 - Page 340

System Command Reference
340 Basic System Configuration Guide
Ipv6-address only applies to the 7750 SR and 7950 XRS.
Values
boot-good-exec
Syntax boot-good-exec file-url
no boot-good-exec
Context config>system
Description Use this command to configure a URL for a CLI script to exec following the success of a boot-up
configuration.
Related Commands
exec - This command executes the contents of a text file as if they were CLI commands entered at the
console.
Default no boot-good-exec
Parameters file-url — Specifies the location and name of the file executed following successful completion of
the boot-up configuration file execution. When this parameter is not specified, no CLI script
file is executed.
Ipv6-address only applies to the 7750 SR and 7950 XRS and ipv4-address applies to the 7950
XRS.
Values
file url local-url | remote-url 255 chars max
local-url [cflash-id/][file-path]
remote-url [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [hostname | ipv4-address | [ipv6-
address]]
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id cf1:, cf1-A:,cf1-B:,cf2:,cf2-A:,cf2-B:,cf3:,cf3-A:,cf3-B:
file url local-url | remote-url 255 chars max
local-url [cflash-id/][file-path]
remote-url [{ftp://} login:pswd@remote-locn/][file-path]