System Command Reference
342 Basic System Configuration Guide
If the chassis mode is not explicitly provisioned in the configuration file, the chassis will
come up in chassis mode a by default. The behavior for the IOMs is described in the following
table:
force — Forces an upgrade from mode a to mode b or d, or an upgrade from mode b to mode d.
clli-code
Syntax clli-code clli-code
no clli-code
Context config>system
Description This command creates a Common Language Location Identifier (CLLI) code string for the SR-series
router. A CLLI code is an 11-character standardized geographic identifier that uniquely identifies
geographic locations and certain functional categories of equipment unique to the telecommunications
industry.
No CLLI validity checks other than truncating or padding the string to eleven characters are performed.
Only one CLLI code can be configured, if multiple CLLI codes are configured the last one entered
overwrites the previous entry.
The no form of the command removes the CLLI code.
Default none — No CLLI codes are configured.
Parameters clli-code — The 11 character string CLLI code. Any printable, seven bit ASCII characters can be
used within the string. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes. If more than 11 characters are entered, the
string is truncated. If less than 11 characters are entered the string is padded with spaces.
config-backup
Syntax config-backup count
Table 41: Chassis Mode Behavior
IOM Behavior
iom-20g-b Comes online if provisioned as iom-20g or iom-20g-b.
iom2-20g Comes online if provisioned as iom-20g, iom-20g-b or iom2-20g.
iom-10g Comes online if provisioned as iom-10g.
iom3-xp Comes online if provisioned as iom3-xp.
To Next Page
Loading...
