System Management
Basic System Configuration Guide 391
Script Control Commands
script-control
Syntax script-control
Context config>system
Description This command enables the context to configure command script parameters.
script-policy
Syntax script-policy policy-name [owner policy-owner]
Context config>system>script-control
config>system>cron>schedule
Description This command is used to configure the CLI script policy.
Parameters policy-name — Specifies the name of the policy. Can be up to 32 characters.
owner policy-owner — Specifies the name of the policy owner. Can be up to 32 characters.
Default “TiMOS CLI”
expire-time
Syntax expire-time {seconds | forever}
Context config>system>script-control>script-policy
Description This command is used to configure the maximum amount of time to keep the run history status entry
from a script run.
Parameters seconds — Specifies the time to keep the run history status entry, in seconds.
Values 0 to 21474836
Default 3600
forever — Keyword to keep the run history status entry indefinitely.
lifetime
Syntax lifetime {seconds | forever}
Context config>system>script-control>script-policy
To Next Page
Loading...
