System Management
Basic System Configuration Guide 467
owner action-owner — Specifies the owner name.
Default TiMOS CLI
run-history run-state — Specifies the state of the test to be run.
Values executing, initializing, terminated
Output The following table describes the show cron action output fields.
Sample Output
*A:Redundancy# show cron action run-history terminated
===============================================================================
CRON Action Run History
===============================================================================
Action "test"
Owner "TiMOS CLI"
-------------------------------------------------------------------------------
Script Run #17
-------------------------------------------------------------------------------
Table 46: Cron Action Field Descriptions
Label Description
Action Displays the name of the action.
Action owner The name of the action owner.
Administrative status Enabled — Administrative status is enabled
Disabled — Administrative status is disabled
Script The name of the script
Script owner The name of the script owner.
Script source location Displays the location of scheduled script.
Max running allowed Displays the maximum number of allowed sessions.
Max completed run
histories
Displays the maximum number of sessions previously run.
Max lifetime allowed Displays the maximum amount of time the script may run.
Completed run histories Displays the number of completed sessions.
Executing run histories Displays the number of sessions in the process of executing.
Initializing run histories Displays the number of sessions ready to run/queued but not executed.
Max time run history
saved
Displays the maximum amount of time to keep the results from a script
run.
Last change Displays the system time a change was made to the configuration.
To Next Page
Loading...
