Show, Clear, Debug, and Tools Command Reference
480 Basic System Configuration Guide
Sample Output
*A:Dut-A# show system ntp
===============================================================================
NTP Status
===============================================================================
Configured : Yes Stratum : 4
Admin Status : up Oper Status : up
Server Enabled : No Server Authenticate : No
Clock Source : 1111:2222:3333:4444:5555:10:100:2
Auth Check : Yes
Current Date & Time: 2015/07/10 12:46:30 UTC
===============================================================================
*A:Dut-A# show system ntp all
===============================================================================
NTP Status
===============================================================================
Configured : Yes Stratum : 4
Admin Status : up Oper Status : up
Server Enabled : No Server Authenticate : No
Clock Source : 1111:2222:3333:4444:5555:10:100:2
Auth Check : Yes
Current Date & Time: 2015/07/10 12:46:32 UTC
===============================================================================
===============================================================================
NTP Active Associations
===============================================================================
State Reference ID St Type A Poll Reach Offset(ms)
Remote
-------------------------------------------------------------------------------
candidate 252.242.213.211 3 srvr - 64 YYYYYYYY -5.829
10.10.1.2
candidate 252.242.213.211 3 srvr - 64 YYYYYYYY -6.889
10.10.100.2
chosen 252.242.213.211 3 srvr - 64 ...YYYYY -6.804
1111:2222:3333:4444:5555:10:100:2
===============================================================================
===============================================================================
Auth yes — Authentication is enabled.
no — Authentication is disabled.
Poll Polling interval in seconds.
R Yes — The NTP peer or server has been reached at least once in the last
8 polls.
No — The NTP peer or server has not been reached at least once in the
last 8 polls.
Offset The time between the local and remote UTC time, in milliseconds.
Table 50: Show NTP Field Description (Continued)
Label Description (Continued)