Show, Clear, Debug, and Tools Command Reference
510 Basic System Configuration Guide
Oper State Rem : notTested
In Use : True
Admin Change : 01/07/2008 21:40:07
Oper Change : 01/07/2008 21:40:25
Failure Reason : None
------------------------------------------------------------------------------
Ring Node Connectivity Verification
------------------------------------------------------------------------------
Admin State : inService
Service ID : 11
VLAN Tag : 11
Dest IP : 10.11.3.1
Src IP : None
Interval : 1 minutes
Src MAC : None
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis#
*A:ALA-48>show>redundancy>multi-chassis# mc-ring peer 10.0.0.2 ring ring11 ring-node
==============================================================================
MC Ring Node entries
==============================================================================
Name Loc Oper St. Failure Reason
In Use Rem Oper St.
------------------------------------------------------------------------------
an1 connected None
Yes notTested
an2 connected None
Yes notTested
------------------------------------------------------------------------------
No. of MC Ring Node entries: 2
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis#
The following table describes multi-chassis ring peer output fields.
Table 60: Redundancy Multi-Chassis Ring Peer Statistics Field Descriptions
Label Description
Message Displays the message type.
Received Indicates the number of valid MC-ring signaling messages received
from the peer.
Transmitted Indicates the number of valid MC-ring signaling messages transmitted
from the peer.
MCS ID Request Displays the number of valid MCS ID requests were received from the
peer.
MCS ID Response Displays the number of valid MCS ID responses were received from
the peer.