MPLS and RSVP
7450 ESS MPLS Guide Page 401
plr
Syntax plr
Context tools>dump>router>mpls>bypass-tunnel
Description
Sample Output
tools dump router mpls bypass-tunnel plr
========================================================================
MPLS Bypass Tunnels
========================================================================
Legend : m - Manual d - Dynamic p - P2mp
========================================================================
To State Out I/F Out Label Reserved Protected Type
BW (Kbps) LSP Count
------------------------------------------------------------------------
10.10.12.1 Up 1/1/4 124181 0 369 d
To : 10.10.12.1 State : Up
Out I/F : 1/1/4 Out Label : 124181
Up Time : 0d 19:24:13 Active Time : n/a
Reserved BW : 0 Kbps Protected LSP Count : 369
Type : Dynamic
SetupPriority : 7 Hold Priority : 0
Class Type : 0 Tunnel Id : 63697
Actual Hops :
10.10.12.2(S) -> 10.10.12.1(S)
Plr List: (Last PlrIdx 2)
--------
PLR List Index = 1
PLR current State = PLRS_CONNECTED
NextNodeSysId = 8.8.8.8
AvoidNodeId = 2.2.2.2
NodeProtect = 2 (Node Protect)
LSP Count = 197
PLR List Index = 2
PLR current State = PLRS_BackupInUse
NextNodeSysId = 8.8.8.8
AvoidNodeId = 2.2.2.2
NodeProtect = 2 (Node Protect)
LSP Count = 203
cspf
Syntax cspf to ip-addr [from ip-addr] [bandwidth bandwidth] [include-bitmap bitmap] [exclude-
bitmap bitmap] [hop-limit limit] [exclude-address excl-addr [excl-addr...(up to 8 max)]]
[use-te-metric] [strict-srlg] [srlg-group grp-id...(up to 8 max)] [exclude-node excl-node-id
To Next Page
Loading...
