Alcatel-Lucent 7450 - Page 470

LMP Commands
Page 470 7450 ESS MPLS Guide
port
Syntax [no] port port-id
Context config>router>lmp>te-link>data-bearer
Description This command configures the port associated with the data bearer. The port must be a physical black
and white Ethernet port.
Default no port
Parameters port-id — Specifies the ID of the port.
Values slot/mda/port
remote-id
Syntax remote-id remote-id
no remote-id
Context config>router>lmp>te-link>data-bearer
Description This command configures the identifier assigned to the data-bearer at the LMP peer node. For a
GMPLS UNI, this is the UNI-N node.
Default no remote-id
Parameters remote-id — Specifies the ID of the data-bearer at the LMP peer node.
Values 1 — 4294967295
shutdown
Syntax [no] shutdown
Context config>router>lmp>te-link>data-bearer
Description This comand administratively enables or disables the data bearer.
Default no shutdown
link-name
Syntax link-name te-link-name
no link-name
Context config>router>lmp>te-link
Description This command configures text names for the TE Link.
Default n/a