GMPLS
7450 ESS MPLS Guide Page 471
Parameters te-link-name — Specifies the text name for the TE Link.
Values 32 characters maximum text string
remote-id
Syntax remote-id id
no remote-id
Context config>router>lmp>te-link
Description This command configures the identifier assigned to the TE Link at the LMP peer node. For a GMPLS
UNI, this is the UNI-N node.
Default no remote-id
Parameters id — Specifies the identifier for the LMP peer node TE Link.
Values 1 — 4294967295
shutdown
Syntax [no] shutdown
Context config>router>lmp>te-link
Description This comand administratively enables or disables the TE Link.
Default no shutdown
shutdown
Syntax [no] shutdown
Context config>router>lmp
Description This comand administratively enables or disables LMP.
Default no shutdown
To Next Page
Loading...
