GMPLS
7450 ESS MPLS Guide Page 491
Parameters te-link-id — Specifies the ID or name of the configured TE Link.
Values 1 — 4294967295 | te-link-name
te-link-name: 32 character maximum name of the TE Link
gmpls-tun-grp
Syntax gmpls-tun-grp [gmpls-tunnel-group-id] [using]
Context show
Description This command displays GMPLS tunnel group status and lists the gLSPs bound to each tunnel group.
Parameters id group-id — Specifies that only GMPLS tunnel groups of the configured ID are displayed.
using — Keyword to display information about which IP interfaces are using the tunnel groups.
member
Syntax member [member-id]
Context show>gmpls-tun-grp gmpls-tunnel-group-id
Description This command displays member information for the specified GMPLS tunnel group.
Parameters member-id — Specifies the ID of the GMPLS tunnel group member.
Values 1 — 16
peer
Syntax peer [peer-node-id] [detail]
Context show>router>lmp
Description This command displays LMP peer information.
Parameters peer-node-id — Specifies the unique identifier for the LMP peer node.
detail — Keyword to display more detailed output.
Output Peer Output Fields — The following table describes peer output fields.
Label Description
Admin State
The administrative state of the LMP peer node.
Oper State
The operational state of the LMP peer node.
Retrans Intvl
The configured interval between resubmitted LMP messages.
To Next Page
Loading...
