Page 492 7450 ESS MPLS Guide
Sample Output
A:ALA-1# show router lmp peer 16843009
================================================================================
LMP Peer 1.1.1.1 (16843009)
================================================================================
Admin State: : Out of Service Oper State : Down
Retrans Intvl : 5000 ms Retry Limit : 6
================================================================================
A:ALA-1#
control-channel
Syntax control-channel lmp-cc-id [detail]
Context show>router>lmp>peer
Description This command displays LMP control channel information for a specific peer.
Parameters lmp-cc-id — Specifies the unsigned integer identifier for the control channel
Values 1 — 42949672
detail — Keyword to display more detailed output.
Output Control Channel Output Fields — The following table describes control channel output fields.
Retry Limit
The configured number of times LMP resends a message before
restarting the process.
Label Description (Continued)
Label Description
Admin State
The administrative state of the control channel.
Oper State
The operational state of the control channel.
Remote Id
The remote ID of the control channel.
Setup Role
The setup role of the control channel.
Hello Interval
The interval at which LMP hello packets are sent on the control
channel.
Hello Dead Intv
The interval after which the IPCC is declared down if no hello packets
are received from the LMP peer.
Peer If Addr
The LMP peer interface address.
Inbound Errors
The total number of inbound packet errors.
Outbound Errors
The total number of outbound packet errors.
Message Type
The types of message packets sent and received on the control channel.
To Next Page
Loading...
