140 Rockwell Automation Publication 1769-UM011H-EN-P - April 2012
Appendix B Dynamic Memory Allocation in CompactLogix Controllers
The Configure CIP Options dialog box appears.
2. In the Max. Messaging Connections per PLC field, enter the maximum
number of read connections you want a particular workstation to make to
a ControlLogix controller.
3. Click OK.
Specify Number of Connections Needed to Optimize Throughput
To specify the number of connections needed to optimize throughput, perform
this procedure.
1. Repeat step 1 from the previous procedure.
2. In the Configure CIP Options dialog box, click the Use Connections for
Writes to ControlLogix processor checkbox.
Once you have selected this feature, you cannot limit the number of
connections established.
To Next Page
Loading...
