Allen-Bradley 1769 - Chapter 6 Place, Configure, and Monitor I;O

Rockwell Automation Publication 1769-UM011H-EN-P - April 2012 81
Chapter 6
Place, Configure, and Monitor I/O
This chapter explains how to place, configure, and monitor CompactLogix I/O
modules.
Select I/O Modules
When choosing 1769 I/O modules, select:
• specialty I/O modules when appropriate.
Some modules have field-side diagnostics, electronic fusing, or
individually-isolated inputs and outputs.
• a 1492 wiring system for each I/O module as an alternative to the terminal
block that comes with the module.
• 1492 PanelConnect modules and cables if you are connecting input
modules to sensors.
Topic Page
Select I/O Modules 81
Place Local I/O Modules 86
Configure I/O 87
Configure Distributed I/O on an EtherNet/IP Network 88
Configure Distributed I/O on a ControlNet Network 89
Configure Distributed I/O on a DeviceNet Network 90
Address I/O Data 91
Determine When Data Is Updated 92
Reconfigure an I/O Module 94