Allen-Bradley CompactLogix Series

128 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
5. From the Type pull-down,
choose Alias.
6. From the Alias For pull-down
menu, browse to find the
addresses recorded below.
7. Click OK.
Go to page 134
to Download the Project.
For Select This Address Example From
EtherNet/IP
_______:O.Data[__].__
my_AENT:O.Data[2].0 Step 14 on page 117
ControlNet
_______:O.Data[__].__
My_ACNR:O.Data[2].0 Step 14 on page 117
adapter
name
output
module
slot #
any
bit
adapter
name
output
module
slot #
any
bit
4. Right-click the Light and select
New ‘xxxx_Light’.
EtherNet/IP
shown