Publication IASIMP-QS001C-EN-P - October 2009 13
Parts List
This table lists the hardware used in this quick start. The hardware you need
depends on the options and examples you choose to complete. Specific
hardware requirements are listed at the beginning of each chapter.
Quantity Catalog Number Description
General Configuration
1 1769-IF4 Compact 4 Channel Analog Current/Voltage Input Module
1 1769-IQ16 Compact 16 Point 24V DC Sinking/Sourcing Input Module
1 1769-IF4XOF2 Compact 8 Bit Resolution, High Speed 4 In/2 Out Analog Combination Module
1 1769-OF2 Compact 2 Channel Analog Current/Voltage Output Module
1
1769-OB16
(1)
Compact 16 Point 24V DC Sourcing Output Module
1 1769-PA2 Compact Expansion Power Supply 120/240V AC Input 2 A @ 5V DC Output Module
1 1769-ECR Compact I/O Right End Cap/Terminator
1
1734-IB4
(2)
POINT I/O 4 Sink Input Module
1
1734-OB4E
(2)(3)
POINT I/O 4 Protected Output Module
1
1734-OE2C
(2)
POINT I/O 2 Current Output Analog Module
3 1734-TB Wiring Base w/ Removable IEC Screw Terminals
1 1794-PS13 FLEX I/O 85 - 264V AC to 24V DC 1.3 A Power Supply
1 22B-V2P3N104 PowerFlex 40 Drive
1 22B-CCB PowerFlex 40 Communication Adapter Cover
1 20AB4P2A3AYNNNNN PowerFlex 70 Drive
1 2711P-K10C4D1 PanelView Plus 10 inch Color Keypad Terminal with EtherNet/IP and RS-232 networks
1 1794-PS3 or
2711P-RSACDIN
FLEX I/O DC Power Supply or general use AC Power Supply
2 1756-CP3 RS-232 Cable
1 2706-NC13 PanelView Plus Serial Cable
2...3 N/A DIN Rail (steel not aluminum)
EtherNet/IP Configuration
1 1769-L32E CompactLogix EtherNet/IP Controller
1 1734-AENT POINT I/O EtherNet/IP Adapter
1 22-COMM-E EtherNet/IP Adapter for Use With the PowerFlex 40
1 20-COMM-E EtherNet/IP Adapter for Use With the PowerFlex 70
1 N/A 8-Port Ethernet Switch
6 N/A Ethernet Cables (straight through)
To Next Page
Loading...
Need help?
General
