Publication IASIMP-QS001C-EN-P - October 2009 165
Create a PowerFlex 70 Application Chapter 12
By starting and stopping the drive, you verified that:
• The controller is correctly communicating with the drive.
• The drive can receive simple commands.
Additional Resources
Resource Topic
DeviceNet Modules in Logix5000 Control Systems, publication
DNET-UM004
Describes common procedures and troubleshooting tasks related to
DeviceNet networks.
Logix5000 Controllers Common Procedures Programming
Manual, publication 1756-PM001
Provides details about adding and configuring modules, establishing
communication, and writing ladder logic.
PowerFlex 70 Adjustable Frequency AC Drive User Manual,
publication 20A-UM001
Provides information about installing, programming, editing
parameters, and troubleshooting the PowerFlex 70 drive.
PowerFlex 70 EtherNet/IP Adapter User Manual, publication
20COMM-UM010
Provides process for installing, configuring, and troubleshooting the
adapter.
PowerFlex 70 ControlNet Adapter User Manual, publication
20COMM-UM003
Provides process for installing, configuring, and troubleshooting the
adapter.
PowerFlex 70 DeviceNet Adapter User Manual, publication
20COMM-UM002
Provides process for installing, configuring, and troubleshooting the
adapter.
Knowledgebase article ID 20539 at
http://support.rockwellautomation.com/
Provides details about uploading EDS files from the drive.
To Next Page
Loading...
