Allen-Bradley CompactLogix Series

Publication IASIMP-QS001C-EN-P - October 2009 203
Create a PanelView Plus Application Chapter 14
Create a Push Button
All controllers
1. From the Objects menu, select
Push Button > Maintained.
2. Click and drag to create the push
button beneath the indicator.
3. Right-click the push button you
just created and select
Properties.
4. On the States tab, verify that
State0 is selected.
5. In the Caption, type Push
to turn light ON.
6. Select State1.
7. In the Caption, type Push to turn
light OFF.