Allen-Bradley CompactLogix Series User Manual

134 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
Download the Project
EtherNet/IP, ControlNet, and DeviceNet
1. Save your changes.
4. Click Download.
If you have no loads wired to
your distributed output modules,
the red status LEDs indicators
may start blinking.
3. Click the Controller Status icon
and select Download.
If you are using ControlNet or EtherNet networks, after you download to the
controller, the 1734 modules show faults. Continue with Set the POINT I/O Chassis
Size on page 135.
If you are using DeviceNet, skip to Test the Distributed I/O Light
on page 141.
2. Move the keyswitch on your controller to Program.

Allen-Bradley CompactLogix Series Specifications

General

Communication Ports	EtherNet/IP
Programming Software	Studio 5000 Logix Designer
Power Supply	24V DC
Series	CompactLogix
Programming Languages	Ladder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), Sequential Function Chart (SFC)
Operating Temperature	0°C to 60°C (32°F to 140°F)
Mounting	DIN rail
Processor Type	Various (depends on model)