Allen-Bradley CompactLogix Series User Manual

167Publication IASIMP-QS001C-EN-P - October 2009 167
Chapter 13
Create a PowerFlex 40 Application
In this chapter, you configure a PowerFlex 40 drive using with the drive keypad and add the
drive to your project using RSLogix 5000 programming software. You also download the
project to the controller so you can test communication with the drive. This project builds
upon the project created in Chapter 10
.
Before You Begin
• Prepare the PowerFlex 40 drive and network adapter, see Chapter 5
• Create a project using RSLogix 5000 programming software, see Chapter 10
What You Need
• For an EtherNet/IP network, no additional software is needed
• For ControlNet, RSNetWorx for ControlNet software
• For DeviceNet, RSNetWorx for DeviceNet software

Allen-Bradley CompactLogix Series Specifications

General

Brand	Allen-Bradley
Model	CompactLogix Series
Category	Controller
Language	English