Allen-Bradley PowerFlex 40 User Manual

130 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
8. Select the node of the 1769-SDN scanner
as recorded on the Network Worksheet
.
9. Click Generate Tags.
10. Click Generate Tags.
11. Click Yes.
When tag generation is
complete, the text log displays.
12. Close the DeviceNet Tag Generator.
Note that new programs and tags
have been added to the controller
organizer. These tasks were created by the
Tag Generator.
13. In the controller organizer, select
MainProgram > MainRoutine.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)