Amada vm2500 - Periodic Maintenance Schedule

V
-5
PERIODIC MAINTENANCE
Che
ck the following parts of the machine every month.
If any part is worn or damaged, it must be changed. Contact AMADA.
Saw blade guides
O Press the BLADE
INSERT OPEN/CLOSE
button to check that the
saw blade inserts
properly open and close.
O Check the sides and
back of the saw blade
for damage.
If they are damaged,
check the insert tips and
backup tips.
O Check that the roller of the optional runout detector properly rotates.
Spiral of chip conveyor (option)
O Check that the spiral of
the chip conveyor
(option) is not worn.
O Check that the
U-shaped groove below
the spiral is not worn.
NOTE
O The chip conveyor (option) operates only when the saw blade is running.