Amada vm2500 - Saw Blade Installation and Setup

IV-4
Unfolding saw blade
NOTICE
O Unpack the saw blade, hold
it with its teeth facing down,
and check that the teeth are
oriented lower right. If its
teeth are oriented lower left,
the saw blade cannot be
used. Contact AMADA.
1 Remove the band
securing the saw
blade, and hold
the saw blade
with the right
hand.
2 Open the first
loop with the left
hand.
3 Grasp the
crossed portion
of the saw blade
with the left hand.
4 Turn back the left
hand, and turn
the right hand
away from the
body.
Saw blade
is easy to
open when
looped inside
5 Slowly release
the right-hand
loop away from
the body.
6 Rehold the
crossed portion
of the saw blade
with both hands.
7 Twist the saw
blade to the left
and right to
unfold it.
8 The saw blade is
now completely
unfolded.