Amada vm2500 - Backgauge

A
-7
BACKGAUGE
T
he backgauge is used
when positioning the work
to the cutting position.
Operating procedure
1 Press the
BACKGAUGE button
on the MENU display
to go to the
BACKGAUGE
display.
2 Press the TARG.
POSITION field to
open the numeric
keypad.
3 Press the 0 to 9 and •
keys to enter the
target position.
4 Press the ENT key.
5 Simultaneously press the
BACKGAUGE button and the
CONFIRMATION button on the
control panel to start the
positioning of the backgauge.
The backgauge starts to move
to the target position.
[17]
[18]