IV-23
Turning off power
N
OTE
O Before turning off the power of the machine at the end of the day’s work,
press and illuminate the CUTTING FLUID button to discharge the cutting fluid
and clean the machine.
1 Press the HYDRAULIC OFF
button to stop the hydraulic
pump motor and extinguish the
HYDRAULIC ON button.
2 Turn the POWER switch to
OFF.
3 Lock out the POWER switch
with the accessory padlock, and
hand the key to the chief
operator for safekeeping.
4 Turn off the shop circuit breaker
switch.
To Next Page
Loading...
