Amada vm2500 - Adjusting Running Speed of Saw Blade

IV-19
ADJUSTING RUNNING SPEED OF SAW BLADE
CNC
INPUT display
1 Press the OVERRIDE
button to go to the
OVERRIDE display.
2 Press the BLADE
SPEED Ÿ or ź
button to adjust the
running speed of the
saw blade.
3 Each time the Ÿ or ź
button is pressed, the
cutting rate increases
or decreases by 1 %.
The settable range of
the override rate (%)
is 50 to 150%.
MANUAL INPUT display (cutting rate “cm
2
/min” input)
1 Press V field to open
the numeric keypad.
2 Enter the desired value with the 0 to 9 and • keys to adjust the
saw blade running speed.
3 Press the ENT key.