-5
SIGNAL TOWER
T
he signal tower
illuminates to indicate that
the machine enters the
conditions described
below.
Even when working apart
from the machine, the
operator can know from the
lights to see if the machine
is operating or not.
Red light: Illuminated to indicate that the machine has stopped at the
occurrence of an error. A buzzer also sounds.
Green light: Illuminated to indicate that cutting is under way.
Yellow light: Illuminated to indicate that the machine has stopped at
the end of cutting operation.
CLAMPING KITS
Clamping kits are
dedicated fixtures to fix the
work to the table. Change
the number of blocks to
suit the height of the work.
Machine speed clamps
with a clamp height of 0 to
240 mm {0 to 9.4 in.} are
also available to fix the
work by one touch.
CLAMPING KIT
To Next Page
Loading...
