-8
6
Gently push the work against the backgauge by using a crane or
forklift.
WARNING
O Keep away from the table while the
backgauge is moving. You may get
injured.
O
Depending on the position and shape of
the work, you may get your hands pinched
and injured between the work and upper
frame or between the work and
backgauge.
NOTICE
O Press the ZERO-RETURN button to zero-return the backgauge before
starting the cutting operation or moving the table.
O Never use the backgauge to push and move the work to the cutting position.
Gently push the work against the backgauge by using a crane or forklift when
positioning the work.
NOTE
O The backgauge stroke is 520 mm {20.47 in.}
O The backgauge cannot be operated during cutting.
O The table does not move unless the backgauge is positioned at 500 mm
{19.69 in.} or more from the saw blade running line.
To Next Page
Loading...
