xiii
Warning signs and messages
O
Read the operator’s manual.
O
Do not operate the machine unattended.
O
Oil-based cutting fluids may catch fire. Do not use them.
O
Some chips can violently burn. Do not cut titanium,
magnesium, and especially carbon.
O
You may lose your eyesight. Do not look directly into the
source of the laser beam.
Class 2M laser product
O
Do not touch the running saw blade.
O
Do not reach into the running chip conveyor.
O
Do not operate the machine with the wheel covers and
hydraulic unit cover removed.
O
You may get an electric shock. Turn off the power, and
open the electrical enclosure.
O
Keep away from the table during operation.
O
Do not clean the upper saw blade guide and table with
compressed air.
O
When cleaning the machine by discharging the cutting fluid
from the cleaning hose nozzle, wear protective goggles.
To Next Page
Loading...
