IV-28
Vibration
Poor cutting
Premature saw blade life
Unstraight cut
Saw blade breakage
Cause Remedy
ż ż ż ż ż
Backup tips worn or cracked. Change backup tips.
ż
Saw blade running in
improper position.
Adjust saw blade to proper
running position.
ż
ż
ż
Saw blade in contact with
flange of wheel.
Adjust clearance to proper
degree.
ż ż ż
Saw blade teeth worn. Change saw blade.
Saw blade binds or its teeth chip
When the saw blade has bound and stopped in the cut, press the
TABLE BACKWARD button. The saw blade motor stops, and the
table moves backward.
Check the saw blade teeth in the binding and adjacent portions for
chipping.
If there is tooth chipping, the chipped teeth may be left in the cut.
Slowly cut the rest of the work with the tooth-chipped saw blade to
remove the chipped teeth. Change to a new saw blade, and cut off
another piece from the work.
To Next Page
Loading...
