Ametek SEQUOIA Series Programming Manual

12 Sequoia Series
1.3.4 RS232C Capabilities of the Power Source
All power source functions are programmable over the RS232C interface. Some capabilities that
support the IEEE-488 interface such as ATN, GET and SRQ interrupts do not apply to the RS232C
interface. Baud rates from 9600 to 115200 are supported on units that have both USB and RS232. To
set up the RS232C interface, refer to section 3.3.
The RS232C interface may be used to install the updated firmware for the controller if needed.
Firmware updates and a Flash Loader utility program and instructions are available from the AMETEK
Programmable Power website for this purpose. (www.programmablepower.com).

Ametek SEQUOIA Series Specifications

General

Brand	Ametek
Model	SEQUOIA Series
Category	Portable Generator
Language	English