Ametek SEQUOIA Series - Power Measurement Subsystem

62 Sequoia Series
4.8 Power Measurement Subsystem
This subsystem programs the power measurement capability of the Sequoia Series power source.
Subsystem Syntax
MEASure | FETCh
[:SCALar]
:POWer
[:AC]
[:REAL]? Returns real power
:APParent? Returns VA
:PFACtor? Returns power factor
:TOTAL? Returns the total power
:REACtive? Returns the reactive power
:DC Return the dc component of power measurement
MEASure:POWer[:AC]?
FETCh:POWer[:AC]?
Phase Selectable
This query returns the in-phase component of power being sourced at the output terminals in kilo watts
(KW).
Query Syntax MEASure[:SCALar]:POWer[:AC][:REAL]?
Parameters None
Examples MEAS:POW:AC?
Returned Parameters <NR2>
Related Commands INST:NSEL
MEASure:POWer:AC:APParent?
FETCh:POWer[:AC]:APParent?
Phase Selectable
This query returns the apparent power being sourced at the output terminals in kilo volt-amperes
(KVA).
Query Syntax MEASure[:SCALar]:POWer[:AC]:APParent?
Parameters None
Examples MEAS:POW:AC:APP?
Returned Parameters <NR2>
Related Commands INST:NSEL