13
COMBIFIT installation, use and maintenance manual
GB
T2
be:
on: cooking in progress;
off: cooking not in progress or stopped;
fLAshing: cooking is in waiting state (door open, error
T3
it allows the user to return to the previous page.
T4
it enables the user to return to the main menu.
T5
to turn on the lighting system in the cooking chamber.
TS
and displayed on this screen.
M
used for this function: any other use should be avoided as it is consid-
ered improper and dangerous.
During operation, supervise the appliance.
Before cooking, run a pre-heating cycle for the oven at a temperature
of about +30 ° / +40 ° C higher than necessary.
-
be set by choosing the function on the display, selecting the desired
value by turning the dial M
button or the dial M. By pressing the dial you can silence the alarms.
When switched on, the display shows the main menu where you can
choose between
mAnuAL cooking, recipes, service.
M ()
vary: clockwise (increase) or counterclockwise (decrease).
At this point the oven is ready for use, in “stand-by” mode, waiting for
user input.
value set (see ). If the oven’s door is opened, the
To Next Page
Loading...
Need help?
General