32
COMBIFIT installation, use and maintenance manual
GB
At the end of the working day, clean the appliance, both for reasons of
hygiene and to prevent operating faults.
jets. Moreover, the appliance should not be cleaned with wire sponges,
ordinary steel brushes or scrapers; eventually, you can use stainless
steel wool, wiping the appliance in the direction of sheet metal grain.
Wait for the cooking chamber to cool down.
Remove the tray holder panels.
Clean the debris that can be removed manually and put the removable
parts in the dishwasher.
all concerned surfaces must be rinsed thoroughly and make sure you
have removed any detergent residue.
-
tergent.
-
In order to keep the electronic components of the oven at a safety
temperature , you should clean the ven-
.
the oven().
Proceed as follows:
1.
ward from its housing.
2.
wash it with warm water and mild
soap and dry it with a clean cloth.
3.
slide it inside its housing.
A
c