22
COMBIFIT installation, use and maintenance manual
GB
the set cooking cycle.
RACK CONTROL mode, press the key for 3
seconds.
the values of the various
levels in RACK CONTROL mode
cannot be memorized; however,
in the case you exit this mod-
ule by accident, you can access
it again (without changing the
cooking parameters) by pressing
the button
and without losing the param-
eters set for the various levels.
function keeps the food hot upon cooking cycle completion.
For example, at the end of a
night-time cooking cycle, the
products are kept at a safe tem-
perature until the operator re-
turns into the kitchen.
Set the hold mode by pressing
the cooking mode button
and select the hold icon
d.
to 120° C) and the relative hu-
midity.
in order to ensure proper hygienic preservation of the products,
we recommend you keep the latter above 60°C and, however,
.
It is also recommended to set a maintenance moisture between 20
and 30% for cooking roasts and between 90 and 100% for casserole
cooking.
5
6
4
3
2
1
0:01
END
230°
START ALL
Fase 4/4
Dom 02-10-15 20:32
80%
180°
INF
HOLD
SET
Arrosto
To Next Page
Loading...
